Currently Empty: $0.00
Car charger “E86 Alegria” PD30W QC3.0 with wireless FM transmitter
1. Input: DC12V-24V.
2. Output:
1 × Type-C – 5V / 3A, 9V / 3A, 12V / 2.5A – 30W max.
1 × USB-A1 – 5V / 3A, 9V / 2A, 12V / 1.5A – 18W max.
1 × USB-A2 – 5V / 0.5A (USB flash drive playback interface).
Total output:
Type-C + USB-A1 = 48W.
3. Supports fast charging protocols: PD30W / QC3.0 / QC2.0 / AFC / FCP etc.
4. BT v5.4, chip JL. Supported protocols: headset, hands-free, A2DP, AVRCP.
5. Transmission range: 10 meters. Transmission frequency: 2.4GHz.
6. FM frequency: 87.5 – 108MHz. FM transmission range: 5m.
7. White dots digital display. RGB colorful light.
8. Supports TF card / USB flash drive up to 32Gb. Supported formats: MP3 / WMA / WAV.
9. Supports music playback control, volume control and calls.
10. Working principle: the mobile phone connects to the transmitter via BT, the transmitter connects to the car speaker via FM.
11. Sizes: 84 × 47 × 54mm.
12. Weight: 43g
Car charger “NZ14B Guerrero” 50W cable set
1. Input: DC12-24V.
2. Output:
1 × Type-C 1:
12V input – 5V / 3A, 9V / 3A, 12V / 2.5A – 30W max.
24V input – 15V / 2A, 20V / 1.5A – 30W max.
PPS: 3.3 – 11V / 3A.
1 × Type-C 2 – 5V / 3A, 9V / 2.22A, 12V / 1.67A – 20W max.
Total output:
Type-C 1 + Type-C 2 = 30W + 20W.
3. Fast charging protocol support: for PD30W / PPS / QC3.0 / QC2.0 / FCP / AFC / SCP and other fast charging protocols.
4. LED 3-color ambient light.
5. Material: aluminum alloy + flame retardant PC.
6. Sets with 1m cable for Lightning to Type-C or Type-C to Type-C.
7. Sizes: 64 × 31mm.
8. Weight: single charger weight – 25g, set with cable weight – 45g.
Car charger “Z13” dual USB three cigarette lighter ports
1. Material: ABS+PC flame retardant material, aluminum alloy shell.
2. Weight: 160g. Cable length: 55cm.
3. Input: DC12V-24V.
4. Output: dual USB output: 5V/2.1A, cigarette lighter output: 12-24V/1-12A.
5. Overcurrent and overvoltage protections for the circuit.
6. Characteristic: LED digital display of charging voltage.
Car charger “Z54B Prosperous” 60W cable set
1. Input: DC12-24V.
2. Output:
1 × Type-C1 port – 5V / 3A, 9V / 3A, 12V / 2.5A – 30W max.
PPS: 3.3 – 11V / 3A.
1 × Type-C2 port – 5V / 3A, 9V / 3A, 12V / 2.5A – 30W max.
PPS: 3.3 – 11V / 3A
Two ports output:
Type-C1 + Type-C2 = 30W + 30W – 60W max.
3. Fast charging protocol support: for PD3.0 / PD30W / PPS / QC3.0 / QC2.0 / AFC / FCP / SCP and other fast charging protocols.
4. Material: aluminum alloy.
5. Indication: blue charging ring indicator.
6. Sets with 1m cable Type-C to iP or Type-C to Type-C.
7. Sizes: 82.5 × 25mm.
8. Weight: single charger weight – 26g, set with cable weight – 50g.
Car holder “CA120 Prospering” for dashboard
1. In-car phone and tablet holder.
2. For 4.7 – 10.5 inches mobile devices. Clamp width: 108 – 245mm.
3. Place of mount: car dashboard.
4. Spring clamping. 360° rotation. Telescopic rod.
5. Material: ABS + silicone.
6. Surface technology: texturing.
7. Sizes: 104 × 155 × 75mm.
8. Weight: 216g.
Car holder “CA52 Intelligent” air outlet magnetic mount
1. Material: PC / ABS / silicone.
2. Surface treatment technology: carbon fiber drying.
3. Sizes: 64*42*61mm. Weight: 49g.
4. Magnet head width: 42mm-42mm.
5. Applicable to mobile phones, universal.
6. Applicable scene: car air outlet.
7. Universal rotation.
Car holder “CA61 Kaile” magnetic for dashboard
1. Material: ABS + silicone.
2. Surface technology: sunburn + polishing.
3. Sizes: 160*45*43mm. Weight: 63g.
4. Bearing range: 2kg.
5. Applicable: center console.
Car holder “CA86 Davy” for air outlet
1. Material: ABS + silicone.
2. Surface technology: texturing.
3. Sizes: 106*117*95mm.
4. Weight: 87g.
5. Suitable for 4.5-7 inch mobile phones. Clamp range: 62-95mm.
6. Mount type: in-car air outlet.
Car holder “H21 Dragon” for air outlet
1. In-car phone holder.
2. For 4.7 – 7 inches mobile devices. Clamp width: 60 – 88mm.
3. Place of mount: car air outlet.
4. Press type clamping. 360° rotation.
5. Material: ABS + PC + silicone.
6. Surface technology: texturing.
7. Sizes: 109 × 84 × 91mm.
8. Weight: 65g.
Car holder “H57 Show” for car display
1. In-car magnetic phone holder.
2. For 4.5 – 7 inches mobile devices. Load bearing: 1.4kg.
3. Place of mount: car multimedia display corner.
4. Strong magnets. Multi-angle adjustment.
5. Material: ABS + N52 magnet.
6. Surface technology: texturing + polishing.
7. Accessories: metal ring × 1. Can be directly used with magnetic module case. Other devices can be used with attached metal ring.
8. Sizes: 124 × 59 × 68mm.
9. Weight: 65g.
Car holder “H64 Gamble” for air outlet
1. In-car phone holder.
2. For 4.5 – 7 inches mobile devices. Clamp width: 65 – 85mm.
3. Place of mount: car air outlet.
4. Press type clamping. Ball joint, can rotate 360 degrees.
5. Material: ABS + silicone.
6. Surface technology: texturing.
7. Sizes: 111 × 93 × 114mm.
8. Weight: 87g.
Car holder “H67 Gamble” For Dashboard
1. In-car phone holder.
2. For 4.5 – 7 inches mobile devices. Clamp width: 65 – 90mm.
3. Place of mount: car dashboard.
4. Gravity clamping. Ball joint, can rotate 360 degrees. Suction cup.
5. Material: ABS + silicone.
6. Surface technology: texturing.
7. Sizes: 86 × 122 × 105mm.
8. Weight: 123g.